铜棒中频感应加热炉感应电炉设备

铜棒中频感应加热炉

一、铜中频感应加热炉说明

的铜杆中频感应加热炉是感应加热炉进行加热铜杆，这是从感应加热炉进行加热钢零件不同，所以制造商需要有丰富的经验和成熟的制造经验有色金属感应加热。铜和铜合金的锻造温度范围很窄，加热的感应器设计得非常精度，可以避免铜棒过热并导致晶粒过度生长。另外，设计时要注意铜棒的表面不能燃烧，没有夹子，压痕，表面不能有明显的色差。

B，技术要求

1.生产线名称：KGPS-150kW / 2.5铜棒中频感应加热炉

2.生产线数：1台

3.铜棒中频感应加热炉用途：用于铜棒加热

4.铜棒中频感应加热炉主要工艺参数及技术要求：

4.1加热工艺要求：

4.1.1铜棒材质：铜棒

4.1.2铜棒规格范围：Φ50x 78 MM

4.1.3加热温度：900℃

4.1.4生产率：每分钟5件，≤400kg / h

4.1.5正常运行时加热稳定，各段之间的温度波动在±15℃以内；的温度差的的铜棒加热后轴向：（端和尾部）≤30℃;径向（核心）≤30℃下

4.1.6冷却水供应系统压力大于0.5MPa（正常水压大于0.4MPa），高温为60℃，相应的软管压力和接口也需要按安全标准放大。

Copper rodMedium frequency induction heating

A,copper medium frequency induction DESCRIPION

hecopper rod medium frequency induction heating isan induction heating forheatingcopper rods, which is different from the induction heating for heating steel parts, so the manufacturer needs to have the experience and maturemanufacturing experience ofnonferrous metal induction heating.Copper and copper alloys have a very narrow forging temperature range, and the heated inductors are designed to be extremely precise, avoidingoverheating of thecopper rodsand causing excessive grain growth.In addition, the design should pay attention to thesurface of thecopper rodcan not be burned, no clips, indentations, the surface can not have obvious color difference.

B, technical requirements

1.Production line name:KGPS-150kW/2.5copper rod medium frequency induction heating

2.Number of production lines:1set

3.Copper rod medium frequency induction heating use: forcopper rodheating

4.Main process parameters and technical requirements ofcopper rod medium frequency induction heating :

4.1Heating process requirements:

4.1.1Copper rodmaterial:copper rod

4.1.2Copper rodspecification range: Φ50x78MM

4.1.3Heating temperature:900℃

4.1.4Productivity:5piecesper minute, ≤400kg/h

4.1.5 heheating is stable during normal operation, the temperature fluctuation between each section is within ±15℃; thetemperature differenceof thecopper rodafter heating: axial(end and tail)≤30℃; radial (core) ≤30℃

4.1.6Cooling water supply system pressure is greater than0.5MPa(normal water pressure is greater than0.4MPa),high temperature is60℃, thecorresponding hose pressure and interface also need to be scaled up to safety standards.

http://www.songdaokeji.com/plus/view.php?aid=150

哪个厂家的铜棒中频感应加热炉感应电炉质量好?铜棒中频感应加热炉感应电炉生产厂家西格马铜棒中频感应加热炉感应电炉质量好，售后完善。

电阻炉厂家信息

咨询电话：

公司电话：

传真号码：0379-6511-2868

公司Q Q： 2817-875916

公司邮箱：2817-875916@qq.com

地址：洛阳实验电炉生产厂家