电机端环中频钎焊设备感应电炉设备

电机端环中频钎焊设备

1，中频感应钎焊技术要求

1.焊接工件：

1.1转子端环和导杆。

1.2材料：2铜，H62黄铜，碳钢，1Cr13不锈钢，

1.3焊料：HL205，HL204，HL303。

1.4转子端环外径尺寸范围为φ396mm-φ1262mm，厚度22mm-80mm，

1.5转子重量：小于10吨（带轴）

2.频率感应钎焊（机）技术要求

2.1。该机器可以被放置到一个转子与直径的1262毫米或更小。竖井长达4.5米，重量不到10吨。

2.2用转子轴可以焊接，焊接时可以无轴。

2.2机器操作简便，可更换不同直径的传感器。

2.4。Ф800mm的工件环端需整体焊接，扇形段应更ф800mm焊接。

2.5工件在机器中可旋转，传感器高度可以调节。

2.5.工件易于装卸，安全可靠。

3焊接温度测控系统：

3.1。红外测温系统应控制系统进行非接触式测量，并通过调节中频工频电源控制系统来调节输出功率，以使待焊接工件中的温度达到恒定值，焊接温度工件的控制精度应在±2％左右。

相关参考：

1，电机端环中频钎焊设备布置图

2，电机端环中频钎焊设备工艺

3，电机端环中频钎焊设备技术特性描述

4，电机端中频钎焊结构说明

5，电机端中频钎焊温度自动控制系统

6，电机端中频钎焊价格

Motor end ring intermediate frequency brazing equipment

1,an intermediate frequency induction brazing echnical Requirements

1.Welding workpiece:

1.1rotor end ring and guide bar.

1.2Material: copper2, brassH62, carbon steel, stainless steel1Cr13,

1.3solder:HL205,HL204,HL303.

1.4rotor end ring outer diameter size range isφ396mm-φ1262mm, thickness22mm-80mm,

1.5rotor weight:less than10tons(with shaft)

2.Frequency induction brazing (machine) echnical Requirements

2.1. hemachine can be placed up toone rotor with adiameter of1262 mmor less. he shaft is up to4.5meters long and weighs less than10tons.

2.2with a rotor shaft can be welded, the welding may be no axis.

2.2easy machine operation, can be replaced with different diameters sensors.

2.4.Ф800mmtheend of the workpieceto be integrally weldedring,the sector should be moreф800mmwelding.

2.5workpiece rotatably in the machine, the sensor height can be adjusted.

2.5. heworkpiece is easy to load and unload, safe and reliable.

3soldering temperature measurement and control systems:

3.1.Infrared temperature measurement system shall control system for contactless measurement of the workpiece and adjust the output power by adjusting the IF power frequency power supply control system, in order to reach a temperature in the workpieces to be welded to a constant value, the welding he temperature control accuracy of the workpiece should be about±2%.

Related reference:

1，Motor end ring intermediate frequency brazing equipment layout

2，Motor end ring intermediate frequency brazing equipment process

3，Description of technical characteristics of motor end ring intermediate frequency brazing equipment

4，Motorendintermediate frequency brazingstructure description

5，Motorendintermediate frequency brazing temperature automatic control system

6，Motorendintermediate frequency brazingprice

http://www.songdaokeji.com/a/chanpin/induction_heating_/2019/0724/142.html

哪个厂家的电机端环中频钎焊设备感应电质量好?电机端环中频钎焊设备感应电生产厂家西格马电机端环中频钎焊设备感应电质量好，售后完善。

电阻炉厂家信息

咨询电话：

公司电话：

传真号码：0379-6511-2868

公司Q Q： 2817-875916

公司邮箱：2817-875916@qq.com

地址：洛阳实验电炉生产厂家